Installation Guide

ENGINEERED QUARTZ SINK
Installation & Care Instructions
FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.
©2018 CAHABA. ALL RIGHTS RESERVED.
1
FOR MODEL NUMBERS
CA324333-B (Onyx Black)
CA324333-M (Mocha Brown)
CA324333-B CA324333-M
BEFORE YOU START
Cahaba recommends that all engineered quartz sinks be installed by an
experienced, professional installer.
IMPORTANT: The enclosed cutout template will create a countertop opening
with a minimal (1/8” or less) reveal. It is recommended that you discuss this
with your installer and agree that this nished appearance is the desired effect.
Cahaba is not responsible for improper sink or countertop installations.
IMPORTANT: The cabinet must be installed, secured, plumb, and level. Failure
of this step can lead to product damage.
Cahaba engineered quartz sinks should only be fastened to a solid surface
countertop (i.e. engineered quartz, Corian
®
or Silestone
®
).
Cahaba is not responsible for sink or countertop if damaged during installation.
Be sure to inspect the sink for damage prior to beginning installation.
Metal edges may be sharp – use caution when handling.
Follow all local plumbing and building codes.
RECOMMENDED TOOLS
Tape Measure
Safety Glasses
Painter’s Tape
Level
Framing Square
Pencil (not permanent marker)
Shims or Cabinet Fillers
Denatured Alcohol
Rubber Mallet
Phillips Head Screwdriver
1 ¼” Hole Saw (for faucet holes)
Clamps
Silicone Sealant
Screws (recommended by
countertop manufacturer)

Summary of content (6 pages)