Installation Guide

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.

PULL-OUT KITCHEN FAUCET

Installation Instructions

DETERMINE INSTALLATION PREFERENCES

This faucet can be installed as 4 hole installation with the escutcheon or

as 2 hole installation with ange.

FLANGE INSTALLATION:

1. Shut off water supplies & remove old faucet.

2. Place ange on the sink.

ESCUTCHEON INSTALLATION:

1. Shut off water supplies & remove old faucet.

2. Screw the bolts into the escutcheon (a).

3. Ensure the gasket is pressed into the escutcheon before the escutcheon

is installed over the three holes in the sink (b).

4. From underneath the sink, hand tighten the mounting nuts. Do not

overtighten (c).

5. Insert faucet body through the hole in escutcheon.

INSTALL THE FAUCET

1. Install the plastic washer (a) and metal washer (b) onto the threaded

mounting shank (c). Thread the nut onto the mounting shank. Lock the

nut into position by tightening the screws. Do not overtighten.

2. Push the quick connector rmly upward and attach it to the receiving

block (d). Pull down moderately to ensure the connection has been

made. If it is necessary to remove the quick connector, squeeze the tabs

on the quick connector and then pull down to disconnect.

3. After connecting the hose, install the weights at the point of the hose

marking “weights here” (e).

FLANGE INSTALLATION OPTION

ESCUTCHEON INSTALLATION OPTION

(a) Screw bolts

into escutcheon.

(b) Press the escutcheon

into the gasket.

mounting nuts.

(a) Plastic washer

(b) Metal washer

SECURE THE FAUCET

(d) Push up

to attach

the quick

connector

(e) Attach the weights

ATTACH CONNECTORS AND WEIGHTS