Installation Guide
FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550. 
©2017 CAHABA. ALL RIGHTS RESERVED.
1
PULL-DOWN KITCHEN FAUCET
Installation & Care Instructions
BEFORE YOU START
•  Make sure you have all necessary parts by checking the diagram and parts list. 
If any part is missing or damaged, please contact Cahaba Customer Service at 
(866) 837-2550 for a replacement.
•  Turn off the hot and cold water supply at the angle stops and turn on the old 
faucet to release any built up pressure. Remove existing faucet. Clean sink or 
countertop to remove any debris, plumber’s putty, or silicone.
•  Place bucket under angle stops. Turn on to flush any debris prior to installing 
new plumbing. Shut off angle stops.
•  Pre-drilled hole size requirement: 1-3/8”
•  This faucet is rated for normal residential use only. 
RECOMMENDED TOOLS 
 
Adjustable wrench
 
Pipe wrench
 
Safety glasses
 
Bucket
 
Screwdriver
 
Plumbing tape
 
Towels
 
Silicone sealant
FOR MODEL NUMBER
CA6112SS CA6112CP
 1  Spray head & hose
 2  O-ring
 3  Wearable ring
 4  Cartridge
 5  Bonnet
 6  Cap
 7  Screw
 8  Handle
 9  Set screw
 10  Flange & washer
 11  Escutcheon
 12  Base plate
 13  Bolt
 14  Mounting nut
 15  Block
 16  O-ring
 17  Quick connect assembly
 18  O-ring
 19  Weights
 20  Plastic washer
 21  Metal washer
 22  Nut
 23  Screw
 24  Pump nut
 25  Flange kit
 26  Bottle
 27  Soap dispenser
FAUCET PARTS





