Installation Guide

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.
©2017 CAHABA. ALL RIGHTS RESERVED.
1
PULL-DOWN KITCHEN FAUCET
Installation & Care Instructions
BEFORE YOU START
Make sure you have all necessary parts by checking the diagram and parts list.
If any part is missing or damaged, please contact Cahaba Customer Service at
(866) 837-2550 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone.
Place bucket under angle stops. Turn on to flush any debris prior to installing
new plumbing. Shut off angle stops.
Pre-drilled hole size requirement: 1-3/8”
This faucet is rated for normal residential use only.
RECOMMENDED TOOLS
Adjustable wrench
Pipe wrench
Safety glasses
Bucket
Screwdriver
Plumbing tape
Towels
Silicone sealant
FOR MODEL NUMBER
CA6112SS CA6112CP
1 Spray head & hose
2 O-ring
3 Wearable ring
4 Cartridge
5 Bonnet
6 Cap
7 Screw
8 Handle
9 Set screw
10 Flange & washer
11 Escutcheon
12 Base plate
13 Bolt
14 Mounting nut
15 Block
16 O-ring
17 Quick connect assembly
18 O-ring
19 Weights
20 Plastic washer
21 Metal washer
22 Nut
23 Screw
24 Pump nut
25 Flange kit
26 Bottle
27 Soap dispenser
FAUCET PARTS

Summary of content (5 pages)