Installation Guide

ManualsBrandsCahaba ManualsKitchenIndustrial Single-Handle Pull-Down Sprayer Kitchen Faucet with Soap Dispenser in Polished Chrome

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.

INDUSTRIAL PULL-DOWN KITCHEN FAUCET

Installation & Care Instructions

BEFORE YOU START

• Make sure you have all necessary parts by checking the diagram and parts list.

If any part is missing or damaged, please contact Cahaba Customer Service at

(866) 837-2550 for a replacement.

• Turn off the hot and cold water supply at the angle stops and turn on the old

faucet to release any built up pressure. Remove existing faucet. Clean sink or

countertop to remove any debris, plumber’s putty, or silicone.

• Place bucket under angle stops. Turn on to flush any debris prior to installing

new plumbing. Shut off angle stops.

• Pre-drilled hole size requirement: 1-3/8”

• This faucet is rated for normal residential use only.

RECOMMENDED TOOLS



Adjustable wrench



Pipe wrench



Safety glasses



Bucket



Screwdriver



Plumbing tape



Towels



Silicone sealant

FOR MODEL NUMBER

CA6113SS CA6113CP

1 Spray head

2 Cartridge

3 Bonnet

4 Cap

5 Screw

6 Handle & O-ring

7 Set screw

8 Handle seat

9 Mounting bracket

10 Rubber washer

11 Metal washer

12 Nut

13 Flange

14 Escutcheon

15 Base Plate

16 Pump kit

17 Flange kit

18 Bottle

19 Soap dispenser

FAUCET PARTS

Summary of content (5 pages)

PAGE 1
INDUSTRIAL PULL-DOWN KITCHEN FAUCET Installation & Care Instructions FOR MODEL NUMBER CA6113SS CA6113CP RECOMMENDED TOOLS Adjustable wrench Pipe wrench BEFORE YOU START Safety glasses • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Cahaba Customer Service at (866) 837-2550 for a replacement. Bucket • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure.
PAGE 2
INDUSTRIAL PULL-DOWN KITCHEN FAUCET Installation & Care Instructions DETERMINE INSTALLATION PREFERENCES This faucet can be installed as 4 hole installation with the escutcheon or as 2 hole installation with flange. FLANGE INSTALLATION OPTION FLANGE INSTALLATION: 1. Shut off water supplies & remove old faucet. 2. Place flange on the sink. 3. Insert faucet body through the hole in the flange. ESCUTCHEON INSTALLATION OPTION ESCUTCHEON INSTALLATION: 1. Shut off water supplies & remove old faucet. 2.
PAGE 3
INDUSTRIAL PULL-DOWN KITCHEN FAUCET Installation & Care Instructions INSTALL THE SOAP DISPENSER 1. Insert the body assembly through the selected hole in the sink (a). 2. Secure the body assembly to the sink with the nut. 3. From under the sink, screw the bottle onto the body assembly shank. (a) Insert body assembly 4. Insert the pump down into the body assembly. (b) Secure with nut (c) Attach bottle CONNECT THE WATER 1.
PAGE 4
INDUSTRIAL PULL-DOWN KITCHEN FAUCET Care & Maintenance Instructions RECOMMENDED CLEANERS XX For stains or light scratches, we suggest a mildly aggressive cleaner. You can also try a paste of baking soda and water, but be sure to rinse well and dry. XX When using any of these cleaners, it is critical that you rub in the direction of the grain lines, rinse completely and towel dry. XX For stubborn stains and more noticeable scratches, we suggest a more aggressive cleaner such as Bar Keeper’s Friend©.
PAGE 5
LIMITED LIFETIME WARRANTY This product has been manufactured and tested to the highest quality standards by Cahaba. We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is not transferable, between homes or owners and is only applicable to residential use.