Installation Guide

ManualsBrandsCahaba ManualsKitchenUndermount Stainless Steel 23-1/4 in. D-Shape Single Bowl Utility Sink with Brushed Nickel Faucet

UNDERMOUNT STAINLESS STEEL SINK

Installation & Care Instructions

FOR MODEL NUMBER

CA122SBD30

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.

BEFORE YOU START

• Cahaba recommends that all undermount sinks be installed by an experienced,

professional installer.

• IMPORTANT: The enclosed cutout template will create a countertop opening

with a minimal (1/8” or less) reveal. It is recommended that you discuss this

with your installer and agree that this nished appearance is the desired effect.

Cahaba is not responsible for improper sink or countertop installations.

• IMPORTANT: The cabinet must be installed, secured, plumb, and level. Failure

of this step can lead to product damage.

• Cahaba undermount sinks should only be fastened to a solid surface

countertop (i.e. granite, Corian® or Silestone®).

• Cahaba is not responsible for sink or countertop if damaged during installation.

Be sure to inspect the sink for damage prior to beginning installation.

• Metal edges may be sharp – use caution when handling.

• Follow all local plumbing and building codes.

RECOMMENDED TOOLS



Tape Measure



Safety Glasses



Painter’s Tape



Level



Framing Square



Pencil (not permanent marker)



Shims or Cabinet Fillers



Denatured Alcohol



Clamps



Construction Adhesive



Silicone Sealant



Screws (recommended by

countertop manufacturer)

Summary of content (5 pages)

PAGE 1
UNDERMOUNT STAINLESS STEEL SINK Installation & Care Instructions FOR MODEL NUMBER CA122SBD30 RECOMMENDED TOOLS Tape Measure Safety Glasses Painter’s Tape Level Framing Square BEFORE YOU START Pencil (not permanent marker) • Cahaba recommends that all undermount sinks be installed by an experienced, professional installer. Shims or Cabinet Fillers • IMPORTANT: The enclosed cutout template will create a countertop opening with a minimal (1/8” or less) reveal.
PAGE 3
UNDERMOUNT STAINLESS STEEL SINK Installation Instructions PREPARE THE COUNTERTOP 1. Position the template (provided with your sink) front to rear so the sink will not interfere with the cabinet; secure with tape. OUTLINE FOR UNDERMOUNT SINK CUTOUT 2. Trace the template and remove. Dry fit the sink to verify the measurements. 3. Following the countertop manufacturer’s instructions, carefully cut the countertop on the inside of the traced line. 4.
PAGE 4
UNDERMOUNT STAINLESS STEEL SINK Care & Maintenance Instructions RECOMMENDED CLEANERS XX For stains or light scratches, we suggest a mildly aggressive cleaner. You can also try a paste of baking soda and water, but be sure to rinse well and dry. XX When using any of these cleaners, it is critical that you rub in the direction of the grain lines of the sink, rinse completely and towel dry.
PAGE 5
LIMITED LIFETIME WARRANTY This product has been manufactured and tested to the highest quality standards by Cahaba. We offer our customers thoughtfully crafted fixtures & accessories, engineered for enduring performance over years of use. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is not transferable, between homes or owners and is only applicable to residential use.