Instructions / Assembly

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.
©2018 CAHABA. ALL RIGHTS RESERVED.
1
TRADITIONAL PULL-DOWN KITCHEN FAUCET
Installation & Care Instructions
BEFORE YOU START
Make sure you have all necessary parts by checking the diagram and parts list.
If any part is missing or damaged, please contact Cahaba Customer Service at
(866) 837-2550 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone.
Place bucket under angle stops. Turn on to flush any debris prior to installing
new plumbing. Shut off angle stops.
Pre-drilled hole size requirement: 1-3/8”
This faucet is rated for normal residential use only.
RECOMMENDED TOOLS
Adjustable wrench
Pipe wrench
Safety glasses
Bucket
Screwdriver
Plumbing tape
Towels
Silicone sealant
FOR MODEL NUMBER
CA6111SS CA6111CP
1 Spray head & hose
2 Cartridge
3 Bonnet
4 Cap
5 Handle
6 Screw
7 Index
8 Plastic washer
9 Metal washer
10 Nut
11 Screw
12 Flange & washer
13 Escutcheon
14 Base plate
15 Block
16 O-ring
17 Quick connect assembly
18 O-ring
19 Weights
20 Pump nut
21 Flange kit
22 Bottle
23 Soap dispenser
FAUCET PARTS

Summary of content (6 pages)