Specification

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT [phone].
©2017 CAHABA. ALL RIGHTS RESERVED.
7
26 IN. SQUARE GRATE LINEAR SHOWER DRAIN
Installation Instructions
INSTALL TILE & COMPLETE INSTALLATION
1. Temporarily Attach Strainer: Place strainer over height adjustment
screws. Temporarily fasten with three 1” pan head screws. Do not over-
tighten.
2. Tile and Grout: Be certain strainer is protected with tape. Allow for 1/16”
clearance between strainer and tile (Q).
X CAUTION: Do not grout or seal this space.
3. Tile all surfaces following manufacturers instructions and TCNA
guidelines.
4. Install tile into tile insert tray (Tile Insert Drains Only). Grout, clean, and
seal all tile in the shower area.
5. Adjust Strainer Height: Remove strainer. Remove tape from strainer and
clean any remaining residue. Place thin end of height adjustment tool
on tile and rest other end on height adjustment screw. Adjust screw for
level. Repeat for all height adjustment screws (R).
6. Place strainer over height adjustment screws. Conrm that strainer is
ush with all tiles. Fasten with three 1” pan head screws. Do not over-
tighten.
(Q) KEEP 1/16” CLEARANCE
(R) ADJUST STRAINER HEIGHT