Specification

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.

30 IN. SQUARE GRATE LINEAR SHOWER DRAIN

Installation Instructions

INSTALL TILE & COMPLETE INSTALLATION

1. Temporarily Attach Strainer: Place strainer over height adjustment

screws. Temporarily fasten with three 1” pan head screws. Do not over-

tighten.

2. Tile and Grout: Be certain strainer is protected with tape. Allow for 1/16”

clearance between strainer and tile (Q).

X CAUTION: Do not grout or seal this space.

3. Tile all surfaces following manufacturers instructions and TCNA

guidelines.

4. Install tile into tile insert tray (Tile Insert Drains Only). Grout, clean, and

seal all tile in the shower area.

5. Adjust Strainer Height: Remove strainer. Remove tape from strainer and

clean any remaining residue. Place thin end of height adjustment tool

on tile and rest other end on height adjustment screw. Adjust screw for

level. Repeat for all height adjustment screws (R).

6. Place strainer over height adjustment screws. Conrm that strainer is

ush with all tiles. Fasten with three 1” pan head screws. Do not over-

tighten.

(Q) KEEP 1/16” CLEARANCE

(R) ADJUST STRAINER HEIGHT