Instructions / Assembly

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (205) 702-9101.

48 IN. SQUARE GRATE LINEAR SHOWER DRAIN

Installation Instructions

LINEAR DRAIN INSTALLATION

1. Remove the 2x4, clean out the void.

2. Screw the optional adapter into the drain hub to

adjust the height of the channel.

3. Install the linear drain channel as you would any tile,

building up and supporting as necessary with mortar.

Ensure drain channel is level and just slightly below

(1/6” or less) the adjacent tile.

4. Line perimeter of linear drain channel with a color-

matching, flexible waterproof sealant.

NOTE: This will allow the stainless steel to expand and NOTE: This will allow the stainless steel to expand and

contract without damaging the grout or tiles. contract without damaging the grout or tiles.

5. Assemble the Linear Drain by placing the hair strainer

into the channel, then place the tray on top.

IMPORTANT: Use the lift-out key to pull the hair IMPORTANT: Use the lift-out key to pull the hair

strainer out when you clean the drain.strainer out when you clean the drain.

FINAL LINEAR DRAIN ASSEMBLY

GRATE

HAIR STRAINER

CHANNEL

TURN ADAPTER CLOCKWISE TO ADJUST HEIGHT OF CHANNEL

CHANNEL INSTALLATION & ADJUSTMENT

CHANNEL

ADAPTER

STANDARD DRAIN HUB

(NOT INCLUDED)