Instructions / Assembly

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (205) 702-9101.

RECOMMENDED CLEANERS

For stains or light scratches, we suggest a mildly aggressive cleaner. You can also try a paste of baking soda and water,

but be sure to rinse well and dry.

For stubborn stains and more noticeable scratches, we suggest a more aggressive cleaner such as Bar Keeper’s

Friend©. For extremely stubborn stains, you may also try to use a Scotch-Brite™ Pad. When using any of these cleaners,

it is critical that you rub in the direction of the grain lines, rinse completely and towel dry.

SUGGESTED MAINTENANCE

• Do not use abrasives, sharp or scraping objects to clean your linear drain.

• The hair catcher should be cleaned periodically to remove any dirt that may have collected during regular use.

CAUTION

• Don’t rub the across the satin nish lines. Scouring across the satin nish lines can damage the original nish.

• Don’t allow soap or other household cleansers to dry on the surface of the linear drain. Most brands contain

chemical additives which will affect the original nish.

• Don’t use solutions of chlorine bleach and water in the drain. Chlorides, which are found in most soaps, detergents,

bleaches, and cleansers, are very aggressive to stainless steel. If left too long, they can cause surface pitting.

• Don’t leave wet sponges, cloths, or cleaning pads on the linear drain. This can lead to surface rust.

• Don’t use a steel wool pad to clean your linear drain. If a more abrasive product is needed, use a green Scotch-

Brite™ pad, being sure to rub in the direction of the satin nish lines. Steel wool pads have a tendency to break

apart and small particles of steel can become embedded in the surface of the linear drain. The steel particles will

rust and will give the appearance that the drain itself is rusting.

60 IN. TILE INSERT LINEAR SHOWER DRAIN

Care & Maintenance