Specification

CREMA LIMESTONE MARBLE SIDESPLASH

Installation Instructions

FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (866) 837-2550.

INSTALL THE COUNTERTOP

1. Install the bathroom vanity and vanity top completely per the manufacturer’s instructions, if it is not

already installed.

2. Dry t the side splash and position it on the side of the vanity, pushing it as far against the back and side

walls as possible. Verify that it ts ush with the edge of the vanity top.

3. Turn the side splash face down and apply caulking adhesive to the side that faces the wall using a circle

pattern, which helps it adhere better. Apply an additional strip of silicone sealer along the bottom edge that

meets the vanity top.

Press the side splash back into place ensuring that the nished end faces forward. Immediately wipe up

any adhesive that oozes out using a damp cloth.

4. Wait until the adhesive dries and apply a bead of silicone along the bottom edge of the side splash where

it meets the vanity. Extend the caulk up the rear corner seam where the side splash and the back splash

meet.

X IMPORTANT: Cahaba is not responsible for sink or countertop if damaged during installation. Be sure to

inspect the sidesplash and vanity top for damage prior to beginning installation.

X IMPORTANT: Cahaba sidesplashes should only be fastened to secure, level vanity cabinets.