Instruction Manual

101
Tutorial 1—The Basics
Tutorials
extended solo. In either case, you need to set the start and end times of the
loop section. Let's have SONAR loop over the section between markers C
and D:
1. In the Loop toolbar, click on the Loop Start time.
2. Press F5 to open the Markers dialog box.
3. In the Markers dialog box, select marker C and click OK. The loop start
time is set to the marker time (17:01:000).
4. In the Loop toolbar, click on the Loop End time.
5. Press F5 to open the Markers dialog box.
6. In the Markers dialog box, select marker D and click OK.
7. Click the Loop On/Off button to enable looping.
8. Click Rewind. The project rewinds to the Loop Start time.
9. Click Play.
A quicker way of selecting the loop times in the preceding example would
be to simply click in the area between the markers at the top of the Clips
pane, then click to copy the selection start and end times to the Loop/
Auto Shuttle toolbar.
A. Click here to select the portion of the project between markers C and D
Next Step:
A