Instruction Manual

1014 New Features in SONAR 7
Piano Roll View Enhancements
To configure the Microscope mode settings, choose Options-PRV Tool
Configuration to open the PRV Tool Configuration dialog.
The following options are available:
Microscope—Use this checkbox to enable/disable Microscope mode
(enabled by default).
Diagonal Size—Use this numeric entry box to specify the diameter size in
pixels of the microscope. The valid range is 20-250 and the default value is
100.
Show When Note Height Less Than—Microscope mode will only be
enabled if the note heights (in pixels) are equal or less than this number.
The valid range is 2-20 and the default value is 6.
Magnifying Time—Use this checkbox to enable/disable horizontal
magnification when the Piano Roll view zoom is such that notes become
very narrow.
In addition to these options, there are some other parameters that can be
configured by adding the following INI variables to the WinCake section of
cakewalk.ini (see CAKEWALK.INI):