Instruction Manual

1078 Cyclone
Using Cyclone
3. In the MIDI track’s Ch field, choose the number of the Cyclone Pad that
you want to trigger with this MIDI track.
Controlling Individual Pads—Volume, Pan,
Mute, Solo, Sync, Looping, and Content
Each Pad has the following controls:
• Volume knob—turn to adjust.
• Pan knob—turn to adjust.
• Folder icon—click this to import a loop to an individual Pad.
• Mute button—click this to mute or unmute the loop that’s assigned to an
individual Pad.
• Solo button—click this to solo or un-solo the loop that’s assigned to an
individual Pad.
• Sync button—click this to synchronize (or unsynchronize) the Pad’s
loop to SONAR‘s pitch and tempo.
• Loop button—click this to cause or prevent the Pad’s loop from
repeating indefinitely between its track length markers that are in the
Pad Editor.
To Export a Sound Bank
1. Click the Export Sound Bank button in the Cyclone toolbar.
The Save As dialog appears.
2. Navigate to the directory where you want to save the Sound Bank.
3. Enter a name for the Sound Bank.
4. Click OK.
Cyclone saves your Sound Bank. All wave files assigned to pads are
saved. You can choose that Sound Bank in any Cyclone project SONAR
automatically saves your current Cyclone settings, so you do not need to
save a Sound Bank unless you want to use these settings in a different
project.
To Import a Sound Bank
1. Click the Import Sound Bank button on the Cyclone toolbar.
The Open dialog appears.
2. Navigate to the directory where you saved your Sound Bank, select it
and click OK.