Instruction Manual

1123
Tracks-Property-Inputs
Menu Reference
Tracks-Property-Inputs
The Tracks-Property-Inputs command lets you specify input sources for
all of your project’s tracks for recording purposes.
For more information about the Tracks-Property-Inputs command, see
Choosing an Input, and Changing Track Settings.
Tracks-Property-Channel
The Tracks-Property-Channel command specifies the MIDI channel
through which the track plays its data.
For more information about the Tracks-Property-Channel command, see
Assigning a MIDI Channel (Chn), and Changing Track Settings.
Tracks-Property-Key+
The Tracks-Property-Key+ command lets you specify how many half-
steps the notes in a MIDI track should be transposed on playback. 12 half-
steps make an octave. The Key+ command does not alter the data in a
track, but causes it to play back in a different key.
For more information about the Tracks-Property-Key+ command, see
Adjusting the Key/Transposing a Track (Key+).
Tracks-Property-Vel+
The Tracks-Property-Vel+ command lets you designate the change in
velocity (volume) to be applied to notes in this track on playback, ranging
from -127 to +127. The Vel+ command does not alter the data in a track, but
causes it to play back with different velocities.
For more information about the Tracks-Property-Vel+ command, see
Adjusting the Note Velocity (Vel+).
Tracks-Property-Time+
The Tracks-Property-Time+ command lets you apply an offset to the start
time of the events in the track. The Time+ command does not alter the data
in a track, but causes it to play back at an earlier or later time.