Instruction Manual

1125
Tracks-Property-Pan
Menu Reference
Tracks-Property-Pan
The Tracks-Property-Pan command lets you specify the stereo distribution
of the output, ranging from 100% L (hard left) to 100% R (hard right), with a
value of C indicating sound that is centered left-to-right.
The Pan setting controls the initial pan of a track during playback. Every
time you start playback, SONAR sets the pan to this initial level.
For more information about the Tracks-Property-Pan command, see
Adjusting Volume and Pan.
Tracks-Property-Icon-Load Icon
The Tracks-Property-Icon-Load Icon command opens the Open dialog,
which displays folders of track icons. You can select an icon from the dialog
to load into the current track.
For more information about track icons, see Track Icons.
Tracks-Property-Icon-Reset Icon
The Tracks-Property-Icon-Reset Icon command resets the track icon in
the current track to the track’s original icon.
For more information about track icons, see Track Icons.
Tracks-Mute
The Tracks-Mute command silences the specified track for playback.
For more information about the Tracks-Mute command, see Track-by-
Track Playback and Silencing Tracks.
Tracks-Archive
The Tracks-Archive command silences the specified track for playback
and removes its data from RAM. You must stop playback to change a
track's archive status.
For more information about the Tracks-Archive command, see Track-by-
Track Playback and Silencing Tracks.