Instruction Manual

1164 Menu Reference
Hide Module
For more information about adding tracks, see Changing Track Settings.
Hide Module
This command allows you to hide track and bus modules in the Console
view. You find the command by right-clicking in the Console view in three
different areas:
• For track modules, right-click in the grey area above a track’s Phase
button.
• For buses, right-click in the grey area between the Send and Return
knobs.
To redisplay modules, see To Choose the Tracks that are Displayed Using
the Track Manager, and Configuring the Console and Track Views.
Set Snap-to = Current
This command, which you find by right-clicking a fader or knob in the
Console or Track views, sets the snap-to position of that fader or knob to its
current value. When you double-click a fader or knob, it jumps to its snap-to
position.
For more information about the Console view, see Preparing to Mix.
90 dB Range
This command, which you find by right-clicking any audio meter in the
Track view or Console view, changes the range that the meter measures to
90 dB.
For more information about meters, see Metering.
78 dB Range
This command, which you find by right-clicking any audio meter in the
Track view or Console view, changes the range that the meter measures to
78dB.
For more information about meters, see Metering.