Instruction Manual

1182 Menu Reference

Playback Meter Options-Peak + RMS

Available in the Playback Meter Options, Record Meter Options, and Mains

Meter Options submenus, this command sets the meter to Peak + RMS.

For more information about Peak + RMS meter display, see Metering.

Playback Meter Options-Show Labels

This command toggles on/off the meter labels.

Playback Meter Options-Hold Peaks

This command causes a meter to hold the most recent peak for a short

time. The peak volume level recorded by the meter is marked by a small

white line which remains for a moment if lock peaks is not checked or until

the end of playback or recording if Lock Peaks is checked.

Playback Meter Options-Lock Peaks

This command when checked and the Hold Peaks is also checked causes

the peak to be locked at its highest point on the meter until the end of

playback or recording.

Output Bus Meter Options-Peak

Available in the Playback Meter Options, Record Meter Options, and Mains

Meter Options submenus, this command sets the meter to show peaks.

For more information about Peak meter display, see Metering.

Output Bus Meter Options-RMS

Available in the Playback Meter Options, Record Meter Options, and Mains

Meter Options submenus, this command sets the meter to RMS.

For more information about RMS meter display, see Metering.