Instruction Manual

1187
Default Crossfade Curves-Slow Out - Linear In
Menu Reference
Default Crossfade Curves-Slow Out -
Linear In
This command sets as default a crossfade in which the first clip fades out
slowly and the second clip fades in at a steady rate.
For more information about crossfades, see Fades and Crossfades.
Percentage
This command sets the Audio Scaling ruler to display the percentage of the
waveform being shown.
dB
This command sets the Audio Scaling ruler to display the dB level of the
waveform being shown.
Zoom Factor
This command sets the Audio Scaling ruler to display the zoom factor (a
multiple of the default zoom level, i.e. a zoom factor of 10 shows the
waveform at 10 times the detail) of the waveform being shown.
Show and Fit Selection
This command zooms vertically and horizontally in the Track view to fit just
the selected clips.
Fit Tracks to Window
This command resizes all shown tracks to fit into the Track view window.
Fit Tracks and Buses to Window
This command fits your entire project, or as many tracks as possible, into
the Track view.