Instruction Manual

Dialog Reference
Use the Contents tab, Index or Search tab to find the dialog you are looking for.
About SONAR dialog
When you use the Help-About SONAR command, the Cakewalk logo appears, with the
version number of your Cakewalk product listed below it.
Apply Audio Effects dialog
This dialog gives you several options when applying audio effects:
Delete the effects from the track effects bin—This option lets you either keep your
effects patched in the selected track(s) after the effects have been applied, or delete the
effect from the track(s).
Fast bounce—This option is normally enabled but should be disabled if the track you are
bouncing contains the External Insert plug-in (see External Insert Plug-in). If you bounce
audio that uses the External Insert plug-in, the bounce operation must be performed in
real-time.
Audible bounce—The Audible bounce option is only available when in real-time bounce
mode (when Fast bounce is unchecked). When Audible bounce is unchecked, no audio
output will be heard during the bounce process. When in real-time bounce mode (Fast
bounce unchecked) and Audible bounce is enabled, you can hear the output of the
mixdown.
Note: Depending on the gainstages used in the project and the mixdown options
selected–such as bouncing with source category assigned to Tracks, or with mute/
solo or automation disabled in the bounce settings or while freezing tracks–the output
may be louder or softer than during normal playback. Please be sure to turn down the
master output level before using real-time audible bounce under these scenarios to
avoid the possibility of speaker damage.