Instruction Manual

1239
Audio CD Burner dialog
Dialog Reference
comprise the sounds that will be written (burned) to an audio CD. Each
track is contained on its own line.
• Add Track—browse to your local file system and add a new track to the
list. All Audio Tracks must be stereo .wav files with a sample rate of
44,100 Hz, and a bit depth of 16. New tracks will go at the end of the
list but can be moved anywhere. After a track is added, its size is
added to the Space Used field, and subtracted from the Space
Available field.
• Move Up / Down—move the selected item(s) up or down in the track list
order.
• Delete Track—remove a track from the list.
• Target Drive—the Target Drive specifies the CD writing device to be
used. The program scans your system to locate all available CD writing
devices. Click on the arrow next to the drive letter to refresh the Target
Drive. This process will verify if a blank CD has been placed in the
drive. Once the blank CD has been verified, the available CD capacity
is listed below the Track List.
• Burn CD—verifies, performs a layout of the tracks and writes the
current track list to CD medium in the selected drive. After the disk is
completed, the disk is ejected from the drive.
• Test Burn—verifies, performs a layout of the tracks and simulates
burning the current track list to CD.
• Cancel Burn—this button appears when either Burn CD or Test Burn
has been selected. It causes the current operation to be aborted.