Instruction Manual

1257
Bounce to Track(s) dialog
Dialog Reference
Dithering
Select from five available dithering types.
• Rectangular
• Triangular
•Pow-r 1
•Pow-r 2
•Pow-r 3
For more information, see Dithering
Mix Enables
As default, each of the Mix Enables options is checked, meaning that your
mixdown will sound the same as playback. You can check or uncheck each
of the following settings to include or exclude them from the mix:
• Track Mute/Solo—If you check this option, tracks that are currently
muted are not mixed down. Also with this option checked, if any tracks
are soloed, only those tracks are included in the mixdown.
• Bus Mute/Solo—If you check this option, buses that are currently muted
are not mixed down. Also with this option, if any buses are soloed, only
the buses soloed are included in the mixdown.
• Track Automation—If you don’t check this option, any volume and pan
automation, including initial volume and pan settings, is ignored
when creating the new track(s). The amplitude of the raw data in the
tracks is used, and the pan is C, or centered.
• Clip Automation—If you don’t check this option, any clip automation,
including any trim settings, is ignored when creating the new track(s).
• Bus Automation
• FX Automation
• Track FX—If you don’t check this option, any effects patched into
various tracks’ patch points, including any plug-in synthesizers
patched into track fx patch points, are ignored when creating the
new track(s).
• Bus FX—If you don’t check this option, any effects patched into buses,
including any plug-in synthesizers patched into buses, are ignored
when creating the new track(s).
• Fast Bounce—When checked, SONAR bounces to tracks as fast as
your computer will allow. If unchecked, bouncing to tracks happens in