Instruction Manual

1259
Chord Fret Number dialog
Dialog Reference
Chord Fret Number dialog
When you right-click a chord symbol in the Staff view, the Chord Properties
dialog box appears. If there is a grid in the dialog box and you click to the
right of it, the Chord Fret Number dialog box appears. This dialog box lets
you enter a fret number to label the fret where the index finger goes (Finger
1). Create your grid and finger positions first, then label the index finger fret.
See also:
Adding Chord Symbols
Chord Properties dialog
In the Staff view, right-click a guitar chord or chord symbol to open the
Chord Properties dialog box. This dialog box lets you edit the guitar chord.
See also:
Adding Chord Symbols
Choose Track Type dialog
Using the Insert key in the Track view inserts a new track of the same type
as the current track, unless you use it in an empty project that has no tracks
yet. In that case, the Choose Track Type dialog box appears, offering you
the choice to insert either an audio or MIDI track.
See also:
Arranging
Chromatic Tuner
The Tuner view helps you to tune your instrument by analyzing any input
signal from the sound card and displaying the pitch on a meter.
Note: The tuner only works with audio hardware that supports 16-bit audio
and a 44.1 sample rate.