Instruction Manual

1262 Dialog Reference
Clip Properties dialog—General
M:B:T
Enable this button to display the clip’s Start and Length properties in M:B:T
(Measure: Beat:Tick) format.
Samples
Enable this button to display the clip’s Start and Length properties in
number of samples format.
H:M:S:F
Enable this button to display the clip’s Start and Length properties in
H:M:S:F (Hour: Minute:Second:Frame) format.
Seconds
Enable this button to display the clip’s Start and Length properties in
number of seconds format.
Original Time
The Original Time property stores and shows the original SMPTE time
stamp associated with the clip. This is the SMPTE time stamp at which the
clip was recorded or imported into the project. The Original Time property
can not be edited.
Revert
If a clip has been moved from its original position, you can click Revert to
move the clip back to its original SMPTE time location.
Time Base
Choose one of the two options in this section to control what happens to a
locked clip when you change the tempo:
• Musical (M:B:T)—if the clip is set to the Musical time base, the clip’s
M:B:T position stays constant, and its Absolute position shifts.
• Absolute—if the clip is set to the Absolute time base, its Absolute
position stays constant, and its M:B:T position shifts.
Clip Mute
Check this to mute the clip.
Lock
Check this to lock the clip’s data and/or position. Use the dropdown menu
that’s next to this checkbox to choose options.
Enable Automation Read
Check this is you want the clip to respond to clip envelopes.