Instruction Manual

1291
Controller/Surface Settings dialog
Dialog Reference
Screen Colors and Wallpaper
Controller/Surface Settings dialog
The Control Surface Settings dialog opens when you click the Add button
in the Control Surfaces dialog. The Control Surface Settings dialog also
opens when you select a control surface from the Connected Controllers/
Surfaces list in the Controller/Surfaces dialog, and then click the Property
Page button that’s in the Control Surfaces dialog.
The Control Surface Settings dialog has the following fields:
• Control Surface—use this field to select the control surface that you
want to add to the Connected Controller/Surfaces list (this option is
greyed-out if you open the dialog with the Property Page button).
• Input Port—use this field to select the MIDI port that the control surface
will use to send MIDI control data to SONAR.
• Output Port—use this field to select the MIDI port that the control
surface will use to receive MIDI control data from SONAR.
For more information, see:
Controllers/Surfaces dialog
External Devices
Controllers/Surfaces dialog
Using the Options-Control Surfaces command opens the Control
Surfaces dialog. This dialog allows you to enable as many control surfaces
as you want to control SONAR with, and configure the control surfaces’
interfaces.
This dialog also has controls to configure the WAI display (Where Am I
display) and ACT indicators.
The Control Surfaces dialog has the following fields and buttons:
Connected Controllers/Surfaces List
This is a list of all the control surfaces that are currently active and enabled
in your project. The list has the following columns:
• Controller/Surface column—this column lists the names of all the
control surfaces that are currently active and enabled in your project.
• In Port and Out Port columns—these columns list MIDI input and MIDI