Instruction Manual

1302 Dialog Reference
Drum Map Manager dialog
data up to the next measure line, regardless of whether the new data
fills the space up to the next measure.
Ask This Every Time
Choosing this option causes the Drag and Drop Options dialog box to open
every time you drag some data.
See also:
Moving and Copying Clips
Splitting and Combining Clips
Drum Map Manager dialog
In the Drum Map Manager dialog you can create and save drum maps for
use with hardware or software samplers. You can customize drum maps to
select specific sounds on any of your samplers.
Drum Maps Used in Current Project
This field displays all the currently available drum maps. click the New
button to create a new drum map and Delete to delete a drum map. Select
a drum map to display the drum mappings in the Drum Map Manager. All
drum maps in this field are saved with the current project.
Presets
Presets can be used to populate the fields in the Drum Map Manager. This
field is also used to save new drum maps by entering a name in the field
and clicking the save button.
Source/Destination
The Source/Destination section is where you map the following for each In
Note (source):
• In Note—The source MIDI note value.
• Out Note—The MIDI note value that plays on the destination sampler.
• Name—The user-defined name for the row.
• Channel—The channel on which the note is transmitted. There is an
option to follow the track’s Channel setting.
• Out Port—The hardware output port or software virtual output port to
which you are sending the note.
• Vel+—Apply a velocity offset setting to an individual mapped pitch.