Instruction Manual

1321
Freeze Options dialog
Dialog Reference
Description
You can type a description of the track folder in this field, and edit the
description later if you want.
Freeze Options dialog
The Freeze Options dialog has the following options:
Fast Bounce
When checked, SONAR bounces to tracks as fast as your computer will
allow. If unchecked, bouncing to tracks happens in real time. Uncheck this
option if you are using a synth that only works in real time. This option is
checked by default.
Hide MIDI Tracks
Check this box if you want the MIDI tracks associated with your synth to be
hidden when the synth is frozen.
Single Bounce Per Track
Check this if you want to create a single clip for all the bounced audio. If you
don’t check this, each separate clip on a track creates a separate clip when
you freeze the track.
Remove Silence
If you checked the previous option, you can check this box and adjust
settings in the Remove Silence dialog to remove silence in a frozen track.
Checking this option will create separate clips from a single clip that has
areas of silence in it.
Freeze Tail Duration n seconds
This value allows for a reverb or delay tail (the reverberations or signal
delay that continue once the source has stopped). Set this value at a high
enough value to allow for any delay or reverb or other effect that you may
have patched into a track.
Gain dialog
The Process-Audio-Gain command opens the Gain dialog.
This dialog lets you precisely control the gain, phase, and stereo interleave
of selected audio data. This dialog has the following controls:
• New Left Channel-From Left slider—Drag the From Left slider to
determine the amount of the original left channel that will be mixed to