Instruction Manual

1326 Dialog Reference
Global Options dialog—Timecode
Enable Versioning of Project (.CWP) Files
Checking this checkbox causes SONAR to save successive versions of a
project with the date the project was saved in the file name. The most
recent version has no date in the name.
• Number of versions to keep—if you enable the versioning option, you
can use this field to choose how many versions to keep. When the
maximum number of files is reached, the oldest file is deleted.
Global Options dialog—Timecode
Using the Options-Global command opens the Global Options dialog box.
Clicking the Timecode tab gives you access to options you might want to
set for all your projects.
Fill in or check the following fields:
When SMPTE/MTC timecode is detected
This option tells SONAR what to do when it detects SMPTE/MTC timecode.
Choose from the following:
• Ask first, then switch to clock source and start—this option
prompts SONAR to alert you when it detects a SMPTE/MTC signal,
asks if you want to sync to the incoming signal, and if you respond
that you do, switches the clock source and starts to receive the
signal.
• Always switch the clock source and start—SONAR
automatically switches to the clock source of the incoming signal
and begins to receive the signal.
• Do not switch clock source, but start if in SMPTE/MTC mode—
this option automatically syncs to the incoming signal if SONAR is
in SMPTE/MTC mode.
• Never switch clock source, never start—SONAR does nothing
when incoming SMPTE/MTC timecode is detected.
Note
When clock source is set to SMPTE/MTC or MIDI Sync,
pressing play in SONAR will:
This option tells SONAR what to do when you press play in SMPTE/MTC or
MIDI Sync mode:
Switch current clock source and start playback