Instruction Manual

1360 Dialog Reference
Marker dialog
Vel+
Sets a velocity offset to a mapped drum note. Values range from -127
through 127. Use the +/- keys to increase or decrease the value.
Vel%
Multiplies the velocity of the note by the percentage you enter. Values
range from 10 to 200.
Map Manager button
Opens the Map Manager dialog.
Out Port
The output port to which the Out Note is sent. You can assign a note to any
port selected in the MIDI Devices dialog. Also, any soft synths in your
project show up as an option. You can use the +/- keys to scroll up or down
in the Output Port list.
Out Chan
Sets the channel in which the mapped drum note plays. You can choose to
follow the track’s channel setting or set the note to a specific channel (1
through 16).
Bank
The bank number on which the mapped note is transmitted.
Patch
Sets the Patch name that the mapped drum note is transmitted to.
Marker dialog
Use the Insert-Marker command to open the Marker dialog box.
This dialog lets you add a marker where you specify in the music.
Name:
Enter the name you want to give the marker.
Lock to SMPTE time
Check this if you want to use SMPTE time code.
Time:
Enter the time at which you want to place the marker.
Groove Clip Pitch
If you want the marker to change the project pitch, select the pitch you want
from the Groove Clip Pitch dropdown menu.