Instruction Manual

1383
Project Options dialog—Metronome tab
Dialog Reference
Setting the MIDI Timing Resolution
Synchronizing Your Gear
Project Options dialog—Metronome tab
The Options-Projects command opens the Project Options dialog. The
Metronome tab lets you set the following metronome options:
General
• Playback—Choosing this option cause the metronome to sound during
playback.
• Recording—Choosing this option cause the metronome to sound during
recording.
• Use Audio Metronome—Choosing this option causes the metronome to
use audio.
• Use MIDI Note—Choosing this option causes the metronome to sound
by playing a MIDI note.
• Count In—Specifies the number of count-in measures or beats.
• Measures—Choosing this option sets the Count-In units to measures.
• Beats—Choosing this option sets the Count-In units to beats.
Audio Metronome
First beat—Select an audio sound for the first beat.
Other beats—Select an audio sound for other beats.
dB—Set the dB level for the corresponding beat.
Output—Set the output you want to use for the audio metronome.
MIDI Note
If you checked Use MIDI Note in the above section, then choose options for
these three parameters:
• Port—Choose the port that the MIDI note plays through.
• Channel—Choose the MIDI channel your metronome plays on.
• Duration—Choose how many ticks you want the metronome sound to
last.
First Beat
Choose a Key (a note) and a Velocity for the first metronome attack in the
measure.