Instruction Manual

1402 Dialog Reference
Remote Control dialog
Number of Frets
This value is determined in the Staff View Layout dialog box, and governs
how many frets SONAR’s Fretboard can display.
Skip Channel 10 (G50)
This checkbox is greyed out unless you choose MIDI Channel in the
Method field. If you use a MIDI converter like the G50, Channel 10 is
reserved for percussion instruments, so if you use a MIDI guitar to transmit
on six consecutive MIDI channels, check this checkbox to avoid using
Channel 10 for your guitar.
See Also:
Regenerate TAB
Tablature
The Staff View
Tablature Settings
Remote Control dialog
When you right-click a control in the Console or Track views and choose
Remote Control from the popup menu, the Remote Control dialog box
appears. This dialog box lets you use a MIDI device as a remote control for
knobs, buttons, and sliders in SONAR, and has the following fields:
Channel Messages
The buttons in this section control command that are specific to individual
MIDI channels. The options are:
• Note On—With this button enabled, the selected control’s value
alternates between its minimum and maximum values every time you
play the note that’s listed in the Note On field. If the selected control is a
button, it toggles between on and off position.
• Note On/Off—With this button enabled, the selected control’s value is
maximized when the note that’s listed in this field is depressed, and
minimized when the note is released. If the selected control is a button,
it toggles between on and off position.
• Controller—With this button enabled and a Controller number entered
in the number field, SONAR “listens” for a controller message that your
MIDI controller is sending, and the selected control moves up or down
as the controller message’s value gets larger or smaller. For example, if