Instruction Manual

1404 Dialog Reference
Remove DC Offset dialog
that follows the significant data.
Note: If you set up remote control for a grouped control, the remote control
works all controls in the group.
For step by step instructions:
To Set Up Remote Control for a Knob, Button, or Fader
See also:
Using Control Groups
Remove DC Offset dialog
The Process-Remove DC Offset command opens the Remove DC
Options dialog, which allows you to remove audio artifacts cause by
electrical mismatches between recording hardware and input instruments
or devices. This dialog has the following fields:
• DC Offset Threshold (dB)—you can set a minimum dB threshold. If the
analyzed DC offset is below this value, no removal takes place.
• Analyze Left Channel (dB) and Right Channel (dB)—this field displays
the DC offset separately for the left and right channels. Press the
Audition button to update the display.
• Compute DC Offset from first 5 seconds only—to speed processing,
select the Compute DC offset from first 5 seconds only checkbox. Only
the first five seconds of a sound file will be analyzed when measuring
the DC offset. The only time that five seconds is not sufficient is if a
long fade-in or mute has been applied at the beginning of the file.
Remove Silence dialog
When you use the Process-Audio-Remove Silence command, or click the
Gate Settings button in the Freeze Options dialog, the Remove Silence
dialog box appears. This command creates absolute silence during silent
passages, eliminating extraneous noise.
The Remove Silence dialog box has the following fields:
Preset field (only appears with Process Audio
command)
Use this field to choose and enter presets. Click the Save button to save
any group of new settings after you enter a name in the Preset field. Click
the Delete button to delete any selected group from the Preset field.