Instruction Manual

1413
Set Timecode at Now Time
Dialog Reference
To select a track, click the track in the Pick Fretboard Track dialog and click
OK.
See Also:
The Fretboard
Set Timecode at Now Time
The Transport-Set Timecode at Now command opens the Set Timecode
at Now Time dialog box, which allows you to move the SMPTE time
00:00:00:00 to the current Now time. If you enter a value in the dialog, the
SMPTE value that you enter is set to the current Now time.
Slide dialog
The Process-Slide command opens the Slide dialog box, which allows you
to move track data forward or backward in the track.
The Slide dialog box has the following fields;
Slide
Choose what kinds of track data you want to move:
• Events in Tracks—Events include notes and controller data but not
markers.
• Markers—If you select any locked markers, SONAR asks whether you
want to slide them too.
By
Enter a number in the By field to control how many units (see below) your
selected data moves. Negative numbers move the data to earlier positions
in the track, but data can not move earlier than beat 1 of the first measure.
Choose from the following units:
• Measures—If you choose Measures, the selected data moves by a
number of whole measures.
• Ticks—If you choose Ticks, the selected data moves by a number of
ticks, which are portions of a beat.
• Seconds—If you choose Seconds, the selected data moves by a number
of whole seconds.
• Frames—If you choose Frames, the selected data moves by a number of
frames, which are the smallest units of SMPTE time.