Instruction Manual

142 Tutorials
Tutorial 6—Using Groove Clips
You have added Groove clips and edited them. Your project should look
like this:
Let’s listen to what we have. Click the Play button in the Transport toolbar.
Next Step: Changing the Pitch of Groove Clips.
Changing the Pitch of Groove Clips
Now that you have heard what your project sounds like, let’s change some
pitch settings.
To Set a Groove Clip to Not Follow the Project Pitch
1. Double-click on the Groove clip in Track 4.
The Loop Construction view appears.
2. Deselect the Follow Project Pitch button .
3. Close the Loop Construction view and listen to your project again.
It sounds different because the Groove clip on Track 4 is no longer
following the default project pitch of E, instead it follows its own root
note of C.
Next, let’s add some pitch markers.
To Add Pitch Markers
1. Click the Solo button in Track 4 to solo the track.
2. Right-click in the Time Ruler at the beginning of measure 1 and select
Insert Marker from the menu.
The Marker dialog appears.