Instruction Manual

1432 Dialog Reference
Track Pan dialog
MIDI Outputs
Choose the MIDI output that you want this track’s data to be sent to. The
MIDI Outputs field is grayed out if the selected track is an audio track.
Audio Outputs
Choose the audio output that you want this track’s data to be sent to. The
Audio Outputs field is grayed out if the selected track is a MIDI track.
See also:
Setting Up Output Devices
Track Pan dialog
The Tracks-Property-Pan command opens the Track Pan dialog box.
Use this command to set the pan for the highlighted track(s).
Note: Panning a stereo track away from the center has the effect of
progressively cutting the volume of events in the track whose initial pan
position is opposite of the direction the stereo track is being panned.
The Track Pan dialog box has only the following field:
Pan
Enter a number between 0 (hard left) and 127 (hard right).
See also:
Adjusting Volume and Pan
Track Patch dialog
The Tracks-Property-Patch command opens the Track Patch dialog box,
which allows you to choose a MIDI patch for the highlighted track. The
Track Patch dialog box has only the following field:
Patch
Fill in the number of the patch that you want SONAR to assign to the
highlighted track.
See also: