Instruction Manual

145
Tutorial 6—Using Groove Clips
Tutorials
Your clip should look something like this:
12. Click the Enable Looping button on the Loop Construction view
toolbar to enable the clip’s Groove clip characteristics.
SONAR automatically slices the clip and assigns in a number of beats.
Notice that SONAR has sliced this clip at eighth note intervals. This is a
clip with a waveform that does not have dramatic transients (sharp rises
in volume). For clips like this, markers at beat intervals work best.
The clip is now a Groove clip, and it looks like this:
The bass track is now a Groove clip, so you can move it where you want
and create repetitions by dragging it out.
Let’s create another Groove clip.
To Create a Groove Clip (example 2)
For this example we are going to use a clip that does not need to be slip-
edited.