Instruction Manual

1450 View Reference
Track View
Show/Hide Meters
button
Click to show or hide all meters in
the Track view. Click the down arrow
to display a menu with options for
showing or hiding specific meter
types. Set options for the display of
each meter type in the appropriate
submenu. For more about these
options, see Changing the Meters’
Display.
Split tool Enables you to split a clip into
separate clips. You can click on a
clip once to create a single split, or
click and drag over a section of a
clip to create two splits. The Split
tool follows the current Snap to Grid
settings.
Mute tool Click the Mute tool to enable
individual clip muting and unmuting.
Set options for this tool by clicking
the small down arrow to the right of
the button. For more information,
see Clip Muting and Isolating (Clip
Soloing).
Zoom tool Use the Zoom tool to zoom in on a
clip or clips in the Tracks pane. With
the Zoom tool selected, drag around
the clip or clips you want to zoom in
on.
Scrub tool Enables scrubbing in the Clips pane.
For more information on scrubbing,
see Scrubbing.
Show/Hide
Inspector
Click this button to toggle on or off
the display of the Track/Bus
Inspector in the Track view. You can
also toggle the display of the Track/
Bus Inspector by pressing the key
on your keyboard.
Control Name Description