Instruction Manual

1454 View Reference
Track View
Each hardware out is represented by a main out. Each main out contains a
left channel and a right channel, but only one volume fader. You control the
left/right balance of each main out with the balance slider.
See:
Main Outs
To Patch a Track Through a Bus
Track/Bus Inspector
The Track/Bus Inspector makes it easy to adjust the current track’s (or
bus’s) controls, because it’s a greatly expanded version of the current
track’s controls that is located on the left side of the Track pane.
In addition to the controls that a track or bus displays in the Track view, the
Track/Bus Inspector also contains a built-in 4-band EQ. See the online help
topic “Using the Per-track EQ” for more information.
The following graphic shows most of the Track/Bus Inspector’s controls
(there may not be room to display all of a track’s controls on the Track/Bus
Inspector, depending on the resolution of your monitor):