Instruction Manual

1491
Loop Construction view
View Reference
value entered into the Pitch (semitone) field adjusts the pitch from C. If you
enter “-1” the pitch would be transposed down by one additional semitone to
B.
Another example: The clip pitch is E. The desired clip pitch is D. If the
Follow Project Pitch option is not checked, and a value of “2” is entered in
the Pitch (semitones) field, the clip is transposed down two semitones to D
from the original pitch of E.
Pitch Field (fine)
The Pitch (fine) field allows you to make tuning adjustments or to transpose
the pitch of a clip up to 50 cents. There are 100 cents in one semitone. A
Pitch (fine) setting of “1” adjusts the pitch up one hundredth of a semitone.
The Pitch (fine) option can “fine tune” a slightly out of tune clip so that it is in
pitch with the remaining clips in a project.
Stop Preview Button
The Stop Preview button stops loop playback.
Preview Loop Button
Plays the current loop repeatedly. Use the Stop Preview control to stop
playback.
Enable Slice Auto Preview
Turns on slice auto preview.
Slice Auto Preview
This control appears grayed out unless the Enable Slice Auto Preview
options is on. This option loops the slice auto preview.
Preview Bus Field
Select the output through which you want to listen to the clip.
Clip Properties
The Properties button opens the Clip Properties dialog.
Select Tool
Use the Select tool to move markers in the Markers bar.