Instruction Manual

161
Tutorial 9—Drum Maps
Tutorials
5. In the Patch column for the Port/Channel pair Cakewalk TTS-1 1 / 1
select Standard Set.
6. In the Drum Map Manager, change the Out Port setting for In Note 38
(D3) to Cakewalk TTS-1.
7. Close the Drum Map Manager and play your project to listen to the
different drum sounds.
To Change Other Drum Map Settings
You can open the Drum Map Manager from either a MIDI track’s Output
menu, or with the Options-Drum Map Manager command.
Change map settings in the Drum Map Manager as described in the
following table:
To do this… Do this…
Add a row (a mapped pitch) Click the Add New Drum Map Entry
button .
Change In Note value Double-click in the appropriate cell and
enter a new value, or click on the right
side of the cell, and when the cursor
changes to an up and down arrow, drag
it up to increase the value or down to
lower the value.
Change the Name setting Double click on the appropriate cell and
enter a new name.
Change the Channel setting Click the appropriate channel cell’s
down arrow and select a channel from
the menu that appears.
Change the Out Port setting Click the appropriate Out Port cell’s
down arrow and select an output port
from the menu that appears.
Change the Vel+ setting Double-click in the appropriate cell and
enter a new value, or click on the right
side of the cell, and when the cursor
changes to an up and down arrow, drag
it up to increase the value or down to
lower the value.