Instruction Manual

182 Controlling Playback

Controlling Playback

A. Marker buttons B. Record options C. Set punch in time D. Set punch out time

E. Set punch points to selection

To Use the Punch In/Out Section

1. Click the Record Options button .

The Record Options dialog box appears.

2. Select between Blending existing data with new data, or Overwriting

existing data with new data.

3. Select between storing looped takes in a single track or storing looped

takes in individual tracks.

For more information see Loop Recording. You can also set Auto-punch

from the Record Options dialog.To Use Auto-punch in the Punch In/Out

Section

To Use Auto-punch in the Punch In/Out Section

1. Activate Auto-punch by clicking the Set punch points button .

2. Click the Punch In M:B:T meter and enter the Punch In time using the

spinners or keying in the desired M:B:T.

3. Click the Punch Out M:B:T meter and enter the Punch Out time using

the spinners or keying in the desired M:B:T.

4. Set the Now Time far enough ahead of the Punch In point for you to be

ready for it.

5. Click the Record button on the Large Transport or press R on your

keyboard.

SONAR plays the project, and begins recording on the selected track at the

Punch In time you entered, then stops recording at the Punch Out time.