Instruction Manual

196 Controlling Playback
Changing Track Settings
PRV Mode button When enabled, displays a track in Inline Piano Roll
view mode.
Show Layers
button
Hides or shows track layers.
Minimize/restore
track button
Collapses track to minimum possible height, or
restores it to the size it was before it was minimized.
Maximize/restore
track button
Expands track to maximum possible height, or
restores it to the size it was before it was maximized.
Vol (volume) The current volume level for the track, ranging from 0
(silent) to 127 (maximum volume).
Pan The stereo distribution of the output, ranging from
100% left (hard left) to 100% right (hard right); a value
of “C” indicates sound that is centered left-to-right.
Velocity trim The change in velocity (volume) that will be applied to
notes in this track on playback; ranges from –127 to
+127
Input The input source for the track, used in recording
Output The output device through which the track is played
Ch (channel) The MIDI channel through which the notes will be
played
Bank The set of patch names available for the track
Patch The instrument sound that will be used for playback.
Time+ An offset applied to the start time of the events in the
track
Key+ The number of steps by which the notes in the track
are transposed on playback (e.g., 12 to transpose up
one octave)
Chorus Adds MIDI chorus effect to the track
Reverb Adds MIDI reverb effect to the track
Parameter... What it means...