Instruction Manual

197
Changing Track Settings
Controlling Playback
To Change a Track Name
1. Double-click on the current track name.
2. Enter the new track name.
3. Click Enter.
The default track names (Track 1, Track 2, etc.) are not actually names, but
placeholders until you name a track. If you reorder the tracks these
placeholders change.
You can rearrange and resize the panes in the Track view as shown in the
following table:
You can customize which tracks are displayed or not displayed, and
enlarge or maximize individual tracks while other tracks remain minimized.
You can also manually set the exact size of a track’s display. The following
table shows how to customize the appearance of tracks in the Track pane:
Snap to Scale
scale type
Displays current scale for Snap to Scale feature
Snap to Scale
root note
Displays root note of current Snap to Scale scale
Snap to Scale on/
off
Turns Snap to Scale feature on or off
To do this... Do this...
Change the width of the Track
pane and Bus pane
Drag the divider that separates the
Track pane from the Clips panes to the
left or right
Change the height of the Mains/
Buses pane
Drag the divider that separates the
Track and Clip panes from the Bus
pane up or down
Parameter... What it means...