Instruction Manual

200 Controlling Playback
Changing Track Settings
You can change numeric values in MIDI tracks as shown in the following
table:
For numeric fields, you can press and hold both mouse buttons to change
the value by increments of 10 (12, a full octave, for Key+).
You can also edit Track properties in the Track Properties dialog box. To
open this dialog box, right-click on the Track bar and select Track
Properties.
You can change the value of a track parameter for several tracks at once
using commands on the Tracks-Property menu. For example, to assign a
group of tracks to the same output, select the tracks you want to assign,
then choose Tracks-Property-Output. These menu commands can also
be used to change the settings for individual tracks.
All track parameters are saved with a SONAR project. However, if you
export a project to a Standard MIDI File, several of the parameters (Key+,
Vel+, Time+, and Chan) are applied to the MIDI data as the file is being
Output Click on the black arrow on the right of the
control and select a driver from the menu that
appears, or double-click on the control and
select a driver from the menu.
Buttons Click to enable or disable
To do this... Do this...
Change the value by 1 Press the - or + key on your numeric
keypad, or click on the spinner control
Change the value by 10 (for
Key+, by 12)
Press the [ or ] key, or right-click on the
spinner control
Enter a new value Press Enter and type the new value
using the keyboard, and press Enter
Control How to change the value