Instruction Manual

240 Recording
Creating a New Project
first beat of each measure and for all other beats. The metronome settings
are stored separately with each project, so you can use different settings for
each one.
Most metronome options can be set in the Metronome toolbar:
A. Record count-in B. Measures C. Beats D. Metronome during playback
E. Metronome during record F. Use Audio Metronome G. Use MIDI metronome
H. Metronome settings
If you don’t see the Metronome toolbar, use the Views-Toolbars command
to open the Toolbars dialog box, and check the Metronome checkbox. The
metronome MIDI note parameters must be set in the Metronome Settings
dialog box.
Note: If you are synchronized to an external clock source, you cannot use
the count-in feature. For more information, see Synchronizing Your Gear .
To Set the Tempo and Metronome for a New Project
1. In the Metronome toolbar, select the Metronome during Recording
and Metronome during Playback options.
2. If you want to hear a count-in before recording begins, set the count-in
to 1 or more. Select Count-in Measures or Count-in Beats .
3. Select Use Audio Metronome and/or Use MIDI Metronome .
4. Arm at least one track.
5. Press r or click to start recording. The count-in will play, and the
Now time will start to advance.
6. If necessary, stop playback and adjust the tempo using the tempo
controls in the toolbar and restart playback. Repeat until the
metronome plays the tempo you want.
7. Press the Spacebar or click to stop recording.
8. Press w, or click to rewind to the beginning of the piece.
ABCDEFGH