Instruction Manual

251
Input Quantizing
Recording
To Turn Input Quantizing On or Off
• To turn input quantizing on or off for a single track, click the track’s
Input Quantize enable/disable button.
• To turn input quantizing on or off for selected tracks, select the tracks
that you want to turn on or off, then use the Tracks-Input Quantize-
Enable/Disable Input Quantize command, or click the Enable/Disable
Input Quantize button in the Record toolbar.
• To turn input quantizing on or off for all tracks, make sure no tracks are
selected (or press Ctrl+A to select all tracks), then use the Tracks-
Input Quantize- Enable/Disable Input Quantize command, or click
the Enable/Disable Input Quantize button in the Record toolbar.
To Set the Resolution
• To set the resolution for a single track, click the track’s Input Quantize
resolution menu, and choose a resolution from the dropdown menu that
appears. You can also click Quantize Settings in the resolution menu
to open the Input Quantize dialog, and type a number of ticks in the
Resolution field.
• To set the resolution for selected tracks, select the tracks that you
want to configure, then use the Tracks-Input Quantize- Quantize
Settings command or click the Quantize Settings button in the Record
toolbar to open the Input Quantize dialog. Then choose a value in the
Resolution field, and click OK.
• To set the resolution for all tracks, deselect all tracks (or select all
tracks), then use the Tracks-Input Quantize- Quantize Settings
command or click the Quantize Settings button in the Record toolbar to
open the Input Quantize dialog. Then choose a value in the Resolution
field, and click OK.
Note: to quantize to a custom resolution value, open the Input Quantize
dialog, and type a custom number of ticks in the resolution field.
To Set Options
• To set options for a single track, click the track’s Input Quantize
resolution menu, and choose Quantize Settings to open the Input
Quantize dialog, or right-click the resolution menu. Then choose
options in the dialog, and click OK.
Note: to get explanations of the options in the Input Quantize dialog,
press F1 when the dialog is open.
• To set options for selected tracks, select the tracks that you want to
configure, and use the Tracks-Input Quantize- Quantize Settings