Instruction Manual

269

Step Recording

Recording

A. Randomize durations field B. Step pattern recording field C. Click to move

insertion point by single beat D. Click to move insertion point by single measure

To Use Basic Step Recording

1. Open the Step Record dialog by using the Transport-Step Record

command, or by clicking in the Record toolbar to display the Step

Record dialog box, or press Shift+F4.

2. Make sure that the Basic mode of the Step Record dialog is displayed

(the Adv. button will be showing if the Basic mode is displayed; if the

Bas. button is showing, click it).

3. Set the insertion point by doing one or more of the following:

• Click the Step Advance button to move the insertion point

forward by the current step size, or click the Step Backwards button

to move the insertion point backward by the current step size.

SONAR displays the insertion point location in the insertion point

location field (see Basic mode picture above).

• Drag the position slider left or right to move the insertion point one

measure at a time.