Instruction Manual

281
Importing Music and Sound
Recording
To Import a track from an Audio CD
1. Set the Now time and current track to indicate where the audio should
be placed.
2. Insert an audio CD into the computer’s CD drive.
3. Choose File-Import-Audio CD to display the Import Audio CD Tracks
dialog box.
4. Make sure the correct CD drive is selected in the Target Drive
dropdown list.
5. Choose the audio track you want to import. SONAR displays the length
and size of all audio tracks.
6. Click Play to listen to the audio track before importing.
7. If you wish to import the audio with a different bit depth than the original
audio track, choose the desired bit depth from the Import Bit Depth
dropdown list.
8. Click OK.
SONAR loads the audio data from the audio CD and places it in the
selected track at the Now time.
Importing Material from Another SONAR
Project
You use the Edit-Copy and Edit-Paste commands to import material from
one project to another using the Windows clipboard. The project that
contains the material you want to import is the source project. The project
into which the material is imported is the target project.
Normally, if you copy material from several different tracks to the Windows
clipboard, the information will be pasted back into separate tracks. You can
choose to paste all the material from the clipboard into a single destination
track in the target project.
You can also copy material from one project to another by displaying the
Track view for both projects side by side, then using drag-and-drop editing.
To Import Material from Another Project
1. Open the source project, or click in the Track view for that project.
2. In the Track view, select the material you want to import.
3. Choose Edit-Copy to display the Copy dialog box.