Instruction Manual

338 Arranging
Take Management and Comping Takes
Note: if you solo a layer and then disable the Show Layers feature, the
Track Scale displays a small yellow indicator to show that a hidden layer is
soloed:
A. Hidden layer solo indicator
To Rebuild Layers
• To rebuild layers (move overlapping clips to separate layers) in a
single-track, right-click the Track Scale and choose Rebuild Layers
from the popup menu.
• For multiple tracks, select the tracks you want to rebuild, and use the
Tracks-Layers-Rebuild Layers command.
To Remove Empty Layers
• To remove empty layers in a single-track, right-click the Track Scale
and choose Remove Empty Layers from the popup menu.
• For multiple tracks, select the tracks you want to compact, and use the
Tracks-Layers-Remove Empty Layers command.
To Add an Empty Layer to a Track
• Right-click the Track Scale at the position where you want the new
layer, and choose Insert Layer from the popup menu.
To Delete a Layer from a Track
• Right-click the Track Scale at the position where you want to delete a
layer, and choose Delete Layer from the popup menu.
To Select a Layer
• Right-click the Track Scale at the same vertical position where the
desired layer is, and choose Select Layer from the popup menu. You
can de-select the layer by clicking an empty area of the Clips pane.
To Loop Record Multiple Takes into Separate Track
Layers
1. Use the Transport-Record Options command to open the Record
Options dialog.
A